OlyBikes is committed to bicycle commuting and bike touring. We only sell stuff we believe in. That's why we carry racks by Jandd Mountaineering and Tubus. We also sell panniers, of course!
New! --> Check out our Bike Touring Article!
Prices may vary from those posted below, and don't include shipping and handling.
Jandd Racks
Standard Rear
The Standard Jandd Rack was designed to fit the needs of all riders. The 6" top width fits Jandd Rac Pacs perfectly, and the 3" extended bottom rail and two vertical struts are in the same plane to form the optimal pannier deflection angle for a perfect pannier fit. All stress points are double-welded; all stainless hardware.Specifications:
- Weight: 26.5oz/752g
- Height Overall: 14in/35.5cm
- Height at Pannier Mounting: 12in/30.5cm
- Width: 6in/15.25cm
- Length: 13.25in/34cm
- Color: Black
Standard Rear Rack Price: Call for pricing.
Low Front Rack
When touring or commuting exclusively by road or in areas where ground clearance is not an issue, the Jandd Low Front Rack is an optimal choice. By locating the panniers up front and below your bike's center of gravity, you can actually influence a heavily loaded bike to handle better than a bike with the same load mounted at the rear. The Jandd Low Front utilizes a uniquely simple design comprised of a single 3/8" 6061 aluminum rod which forms the entire main frame of the rack. Reverse inverted attachment armatures are double-welded at their bases for easy mounting to the lower fork eyelets. Slotted mounting tracks near the top of the rack allow for easy adaptation to almost any fork configuration. All stress points are double-welded.Specifications:
- Weight: 26.5oz/752g
- Height Overall: 14in/35.5cm
- Height at Pannier Mounting: 12in/30.5cm
- Width: 6in/15.25cm
- Length: 13.25in/34cm
- Color: Black
Low Front Rack Price: Call for pricing. 
Expedition Rear Rack
The Expedition Rack is the rack of choice for cyclists who require exceptional durability and expanded size, measuring a full three inches longer than Jandd's standard rack. Built from 3/8" 6061 aluminum stock, the Expedition Rack is intended to be used primarily with Jandd's Large Mountain and Expedition Panniers where additional rear clearance may be needed for large loads. However, the Expedition is also a good choice when added room is needed for carting the evening's firewood or portaging large containers of water. The secret to this rack's tremendous strength is a third support strut which angles back 21 degrees from the main load-bearing strut. In addition, the rear support strut offers a 6" long section for attaching the lower portion of your panniers' suspension system to enable precise positioning of your load. All stress points are double-welded.Specifications:
- Weight: 31oz/1kg
- Height Overall: 14in/35.5cm
- Height at Pannier Mounting: 12in/30.5cm
- Width: 6in/15.25cm
- Length: 16.25in/41cm
- Color: Black
Expedition Rear Rack Price: Call for pricing.
Extreme Front Rack
The Jandd Extreme Front Rack is the only equipment to reach for when front panniers are a necessity. The 3/8" 6061 aluminum rod stock is double-welded for strength in the most adverse conditions, and the generous 6"- wide top plate ensures sufficient space for a Jandd Rac Pac or a compact sleeping bag. On the Extreme Front Rack panniers can be mounted low for stability or high if added clearance is desirable. Mounting is quick and easy due to innovative reverse inverted armatures which allow the rack to fit onto almost any fork configuration with minimal adjustment. Two sets of mounting slots, one near the top and one midway up from the fork, allow for solid attachment using clamps (included) or at fixed eyelet points on the fork. All stress points are double-welded.Specifications:
- Weight: 31oz/1kg
- Height Overall: 14in/35.5cm
- Height at Pannier Mounting: 12in/30.5cm
- Width: 6in/15.25cm
- Length: 13.25in/34cm
- Color: Black
Extreme Front Rack Price: Call for pricing. 
Back to top
Tubus Racks
Tubus makes lightweight, high-strength racks from tubular cromoly steel. These are among the finest racks out there. They are stiff, adjust to most any bike, and have very respectible cargo weight limits.
Tubus Duo Front Rack
The Duo is a well designed two-part front carrier system for mid-fork braze-ons that are drilled through to both sides of the fork blade. A very lightweight and stable set-up.Specifications:
- Weight: 320g/11.2oz
- Max. Load: 15kg/33lbs
- Wheel Size: 26" or 700C
Tubus Duo Price: Call for pricing. 
Tubus Tara Front Rack
The Tara is the most universal of the two lowrider systems and now simplest design as well. Whether you have mid-fork braze-ons or not, this carrier is for you. Hardware is available but not included for bikes without mid-fork braze-ons.Specifications:
- Weight: 470g/18oz
- Max. Load: 15kg/33lbs
- Wheel Size: 26" or 700C
Tubus Tara Price: Call for pricing. 
Tubus Fly Rear Rack
The Fly is a lightweight carrier designed to carry panniers on a fast road or cross bike. Created with narrower tires in mind, the V-shaped design allows for a low-profile while protecting the rear wheel. A single adjustable strut attaches to the brake bridge.Specifications:
- Weight: 325g / 12oz
- Max. Load: 18 kg/ 40 lbs
- Wheel Size: 26" or 700C
Tubus Fly Price: Call for pricing. 
Tubus Cargo Rear Rack
The Cargo is the flagship of the Tubus line of carriers. An extremely stable and durable carrier that will work with just about any pannier set made. The unique mounting system makes it compatible with most any braze-on configuration. Brazed-on reflector bracket and fender stay eyelets are standard features. Go ahead and load it up!Specifications:
- Weight: 515g/18oz.
- Max. Load: 40kg/ 90lbs
- Wheel Size: 26" or 700c
Tubus Cargo Price: Call for pricing. 
Back to top
